| Peer-Reviewed

Effect of Pressure on Solidification Process and Mechanical Properties During Semi-Solid Casting by Computational Fluid Dynamics (CFD)

Received: 17 June 2018     Accepted: 3 July 2018     Published: 31 July 2018
Views:       Downloads:
Abstract

This paper focused on the development of Computational Fluid Dynamics (CFD) by a mathematical model based on the control volume method, which would enable efficient simulation of the semi-solid processing of complex industrial casting parts. Theoretical basis of the numerical simulation was briefly introduced. The latent heat was incorporated using the effective specific heat. The mass, momentum and enthalpy transport equation for each phase were solved. The application of the model allowed determining the temperature fields in the metal and the mold at 1 sec and the liquid fraction at time step 0.15 s with three different pressure regimes. The calculated pressure distribution and the evolution of liquid fraction through the material were examined and used to clarify their influence further investigated with tensile and hardness testing.

Published in Advances in Materials (Volume 7, Issue 2)
DOI 10.11648/j.am.20180702.15
Page(s) 44-49
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2018. Published by Science Publishing Group

Keywords

Aluminum Alloy, Modeling, CFD, SEMI-Solid Casting, Solidification, Liquid Fraction, Mechanical Properties

References
[1] M. C. Flemings, Met. Trans. 22A (1991) 957.
[2] S. P. Midson and K. Brissing, Modern Casting (1997) 41.
[3] K. P. Young, CIATF Technical Forum, UK, 1997.
[4] V. I. Rudnev and R. L. Cook, Forging Magazine (1995) 27-30.
[5] V. S. Nemkov, V. B. Demidovich, V. I. Rudnev and O. Fishman, Proc. of Electroheat Congress “ELECTROTECH 92”, Montreal (1992) 180-188.
[6] A. Billets, Aluminum Pechiney, 1996.
[7] S. Midson, V. Rudnev and R. Gallik, Proc. 5th Int. Conference on Semi-Solid Processing, Golden, CO (1998) 497-504.
[8] J. J. Park, Met. Mater. Int. 20, 317 (2014).
[9] G. Timelli, G. Camicia, S. Ferraro, and R. Molina, Met. Mater. Int. 20, 677 (2014).
[10] B. G. Thomas, Q. Yuan, S. Mahmood, R. Liu and R. Chaudhary, Metallurgical and Materials Transactions B, 45(1), (2014) pp. 22-35.
[11] A. Ludwig, A. Kharicha and M. Wu, (2014). Metallurgical and Materials Transactions B, 45(1), 36-43.
[12] M. G. Mohammadi, et al., Metallurgical and Materials Transaction B, p. 1-10. (2016).
[13] N. H. Hai, D. M. Duc, N. N. Tien, and N. T. Tai, Adv. Tech. Mater. Produ. Proc., (eds. V. Y. Shchukin, G. V. Kozhevnikova and K. D. Kirdun), Belarus National Academy of Sciences, 209 (2011).
[14] P. Quang, N. H. Hai, and D. M. Nghiep, Adv. Tech. Mater. Produ. Proc., (eds. V. Y. Shchukin, G. V. Kozhevnikova and K. D. Kirdun) Belarus National Academy of Sciences, 225 (2011).
[15] D. M. Duc, N. H. Hai, and P. Quang, Sci. Tech. Metals 46, 37 (2013).
[16] N. T. Tai, D. M. Duc, N. H. Hai, and P. Quang, J. Sci. Tech. 5A, 201 (2013).
[17] N. T. Tai, D. M. Duc, N. H. Hai, and P. Quang, J. Sci. Tech. 5A, 194 (2013).
[18] D. M. Duc, N. H. Hai, and P. Quang, Korean J. Met. Mater., Vol. 55, No. 3 (2017), pp. 202~208.
[19] ANSYS FLUENT 14.1, “Theory guide”, Ch. 1. Basic fluid flow, ANSYS, Inc. (2011).
[20] ANSYS FLUENT 14.1, “Theory guide”, Ch. 17. Solidification and melting, ANSYS, Inc. (2011).
[21] J. R. Viegas, M. W. Rubesin, and C. C. Horstman, Technical Report AIAA-85-0180, AIAA 23rd Aerospace Sciences Meeting, Reno, Nevada (1985).
[22] V. R. Voller, American Metallurgical Society, Palm Desert, CA, 1987.
[23] V. R. Voller, A. D. Brent and K. J. Reid, Technical report, Conference for Solidification Processing, Ranmoor House, Sheffield, September 1987.
[24] V. R. Voller and C. Prakash, Int. J. Heat Mass Transfer, 30 (1987)1709-1720.
[25] ANSYS FLUENT 14.1 Software, ANSYS, Inc. (2011).
[26] E. A. Brandes, Smithells metals reference book, Butterworths, 1983.
Cite This Article
  • APA Style

    Nguyen Hong Hai, Pham Quang. (2018). Effect of Pressure on Solidification Process and Mechanical Properties During Semi-Solid Casting by Computational Fluid Dynamics (CFD). Advances in Materials, 7(2), 44-49. https://doi.org/10.11648/j.am.20180702.15

    Copy | Download

    ACS Style

    Nguyen Hong Hai; Pham Quang. Effect of Pressure on Solidification Process and Mechanical Properties During Semi-Solid Casting by Computational Fluid Dynamics (CFD). Adv. Mater. 2018, 7(2), 44-49. doi: 10.11648/j.am.20180702.15

    Copy | Download

    AMA Style

    Nguyen Hong Hai, Pham Quang. Effect of Pressure on Solidification Process and Mechanical Properties During Semi-Solid Casting by Computational Fluid Dynamics (CFD). Adv Mater. 2018;7(2):44-49. doi: 10.11648/j.am.20180702.15

    Copy | Download

  • @article{10.11648/j.am.20180702.15,
      author = {Nguyen Hong Hai and Pham Quang},
      title = {Effect of Pressure on Solidification Process and Mechanical Properties During Semi-Solid Casting by Computational Fluid Dynamics (CFD)},
      journal = {Advances in Materials},
      volume = {7},
      number = {2},
      pages = {44-49},
      doi = {10.11648/j.am.20180702.15},
      url = {https://doi.org/10.11648/j.am.20180702.15},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.am.20180702.15},
      abstract = {This paper focused on the development of Computational Fluid Dynamics (CFD) by a mathematical model based on the control volume method, which would enable efficient simulation of the semi-solid processing of complex industrial casting parts. Theoretical basis of the numerical simulation was briefly introduced. The latent heat was incorporated using the effective specific heat. The mass, momentum and enthalpy transport equation for each phase were solved. The application of the model allowed determining the temperature fields in the metal and the mold at 1 sec and the liquid fraction at time step 0.15 s with three different pressure regimes. The calculated pressure distribution and the evolution of liquid fraction through the material were examined and used to clarify their influence further investigated with tensile and hardness testing.},
     year = {2018}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Effect of Pressure on Solidification Process and Mechanical Properties During Semi-Solid Casting by Computational Fluid Dynamics (CFD)
    AU  - Nguyen Hong Hai
    AU  - Pham Quang
    Y1  - 2018/07/31
    PY  - 2018
    N1  - https://doi.org/10.11648/j.am.20180702.15
    DO  - 10.11648/j.am.20180702.15
    T2  - Advances in Materials
    JF  - Advances in Materials
    JO  - Advances in Materials
    SP  - 44
    EP  - 49
    PB  - Science Publishing Group
    SN  - 2327-252X
    UR  - https://doi.org/10.11648/j.am.20180702.15
    AB  - This paper focused on the development of Computational Fluid Dynamics (CFD) by a mathematical model based on the control volume method, which would enable efficient simulation of the semi-solid processing of complex industrial casting parts. Theoretical basis of the numerical simulation was briefly introduced. The latent heat was incorporated using the effective specific heat. The mass, momentum and enthalpy transport equation for each phase were solved. The application of the model allowed determining the temperature fields in the metal and the mold at 1 sec and the liquid fraction at time step 0.15 s with three different pressure regimes. The calculated pressure distribution and the evolution of liquid fraction through the material were examined and used to clarify their influence further investigated with tensile and hardness testing.
    VL  - 7
    IS  - 2
    ER  - 

    Copy | Download

Author Information
  • Key Laboratory of Metal Materials Technology, Hanoi University of Science and Technology, Hanoi, Vietnam

  • Key Laboratory of Metal Materials Technology, Hanoi University of Science and Technology, Hanoi, Vietnam

  • Sections