| Peer-Reviewed

Bitumen Paints, an Old Story with New Approach, Part-2, Water Based Paints

Received: 22 August 2014     Accepted: 3 September 2014     Published: 20 September 2014
Views:       Downloads:
Abstract

Bitumen paints have lost their importance but are still used for large area applications such as tanks and pipelines. It was determined that improving solvent based paint properties by physical or chemical modification by polymers was possible. Applying this approach for water based paints has shown that advance in properties such as hardness and drying times without loss in adhesion and flexibility can be obtained by blending of various polymeric emulsions with bitumen emulsions used for waterproofing membranes. Changes in morphology of the films occurred after blending, indicating interaction between bitumen maltene fractions and polymers. Physical modifications with styrene acrylic emulsions were more rewarding than elastomeric or chemically modifying crosslinking emulsions.

Published in Advances in Materials (Volume 3, Issue 3)
DOI 10.11648/j.am.20140303.12
Page(s) 16-21
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2014. Published by Science Publishing Group

Keywords

Bitumen Paints, Water Based, Chemical Modifications, Physical Modifications

References
[1] D. Lesueur, Adv. Colloid Interface Sci. 145, (2009) 42–82.
[2] Y. Yildirim, Construct. Build. Mater. 21, (2007) 66-72.
[3] A.P. Kuriakose, S. Kochu Baby Manjooran, Surf. Coat. Technol.145, (2001) 132-138.
[4] R. Aydemir, M. Eren, H. Aşkun, A. E. Özbey, M. Orbay, Prog. Org. Coat. 76, (2013) 966-971
Cite This Article
  • APA Style

    Mesut Eren, Rıza Aydemir, Hakan Aşkun, Ali Eren Özbey, Murat Orbay. (2014). Bitumen Paints, an Old Story with New Approach, Part-2, Water Based Paints. Advances in Materials, 3(3), 16-21. https://doi.org/10.11648/j.am.20140303.12

    Copy | Download

    ACS Style

    Mesut Eren; Rıza Aydemir; Hakan Aşkun; Ali Eren Özbey; Murat Orbay. Bitumen Paints, an Old Story with New Approach, Part-2, Water Based Paints. Adv. Mater. 2014, 3(3), 16-21. doi: 10.11648/j.am.20140303.12

    Copy | Download

    AMA Style

    Mesut Eren, Rıza Aydemir, Hakan Aşkun, Ali Eren Özbey, Murat Orbay. Bitumen Paints, an Old Story with New Approach, Part-2, Water Based Paints. Adv Mater. 2014;3(3):16-21. doi: 10.11648/j.am.20140303.12

    Copy | Download

  • @article{10.11648/j.am.20140303.12,
      author = {Mesut Eren and Rıza Aydemir and Hakan Aşkun and Ali Eren Özbey and Murat Orbay},
      title = {Bitumen Paints, an Old Story with New Approach, Part-2, Water Based Paints},
      journal = {Advances in Materials},
      volume = {3},
      number = {3},
      pages = {16-21},
      doi = {10.11648/j.am.20140303.12},
      url = {https://doi.org/10.11648/j.am.20140303.12},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.am.20140303.12},
      abstract = {Bitumen paints have lost their importance but are still used for large area applications such as tanks and pipelines. It was determined that improving solvent based paint properties by physical or chemical modification by polymers was possible. Applying this approach for water based paints has shown that advance in properties such as hardness and drying times without loss in adhesion and flexibility can be obtained by blending of various polymeric emulsions with bitumen emulsions used for waterproofing membranes. Changes in morphology of the films occurred after blending, indicating interaction between bitumen maltene fractions and polymers. Physical modifications with styrene acrylic emulsions were more rewarding than elastomeric or chemically modifying crosslinking emulsions.},
     year = {2014}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Bitumen Paints, an Old Story with New Approach, Part-2, Water Based Paints
    AU  - Mesut Eren
    AU  - Rıza Aydemir
    AU  - Hakan Aşkun
    AU  - Ali Eren Özbey
    AU  - Murat Orbay
    Y1  - 2014/09/20
    PY  - 2014
    N1  - https://doi.org/10.11648/j.am.20140303.12
    DO  - 10.11648/j.am.20140303.12
    T2  - Advances in Materials
    JF  - Advances in Materials
    JO  - Advances in Materials
    SP  - 16
    EP  - 21
    PB  - Science Publishing Group
    SN  - 2327-252X
    UR  - https://doi.org/10.11648/j.am.20140303.12
    AB  - Bitumen paints have lost their importance but are still used for large area applications such as tanks and pipelines. It was determined that improving solvent based paint properties by physical or chemical modification by polymers was possible. Applying this approach for water based paints has shown that advance in properties such as hardness and drying times without loss in adhesion and flexibility can be obtained by blending of various polymeric emulsions with bitumen emulsions used for waterproofing membranes. Changes in morphology of the films occurred after blending, indicating interaction between bitumen maltene fractions and polymers. Physical modifications with styrene acrylic emulsions were more rewarding than elastomeric or chemically modifying crosslinking emulsions.
    VL  - 3
    IS  - 3
    ER  - 

    Copy | Download

Author Information
  • Betek Boya ve Kimya San. A.?., ?stanbul, Turkey

  • Betek Boya ve Kimya San. A.?., ?stanbul, Turkey; Istanbul University, Fac. of Engineering (Ret.) ?stanbul, Turkey

  • Sections